Loa JBL SCL 1

Thông Số Kỹ Thuật:
| Type | 2-Way In-room loudspeaker |
|---|---|
| Low Frequency Drivers | Dual 12-inch (300mm) Black Carbon Cellulose Composite Cone (C4) cast-frame woofers |
| High Frequency Driver | 3″ (75mm) dual annular Teonex ring-diaphragm compression driver with dual neodymium motor structures mated to Sonoglass HDI horn |
| Recommended Amplifier Power (Full bandwidth) | 500 WRMS, minimum |
| Recommended Amplifier Power (80 Hz HPF) | 500 WRMS, minimum |
| Impedance | 4 Ohm |
| Loudspeaker Sensitivity | 94 dB/1W/1m |
| Frequency Response | 40 Hz – 24 kHz (-6 dB), 3rd order LF roll-off |
| Crossover Frequency | 775 Hz |
| Coverage area, -6 dB @ 10 kHz | Approximately 120 degrees horizontal x 100 degrees vertical |
| Coverage area, -6 dB @ 20 kHz | Approximately 90 degrees horizontal x 70 degrees vertical |
| Enclosure Type | Complementary Bass Alignment System (CBAS™) |
| HF Level Controls | 3 Position – No grille, With grille, or With screen |
| Grille Dimensions | 47.98″ H x 19″ W x 0.787″ D (1218.7mm x 482.6mm x 20mm) |
| Product Dimensions | 47.98″ H x 19″ W x 14.49″ D (1218.7mm x 482.6mm x 368.1mm) |
| Input Type | Dual sets of gold-plated binding posts |
| Product Weight | 177.5 lb. (80.5kg) |
| Shipping Weight | 306.5 lb. (139 kg) |
| Shipping Units of Measure | Each |
| Warranty | 5 Years |


















Đánh giá
Chưa có đánh giá nào.